Testing The Installation In Windows 2000 - Creative Blaster Modem Getting Started Manual

Testing the
Installation in
Windows 2000
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel window, double-click the Phone and Modems icon.
3. In the Creative Modem Blaster V.92 DE5721 Properties dialogue box, click the Diagnostics tab.
4. Click the Query Modem button to display the response status of
your modem.
You should see a dialogue box similar to Figure 3-4.
If your modem is not responding, it may be due to a conflict
between the modem and another peripheral device. To resolve the
conflict, you must change the settings of your modem.
See "Resolving Hardware Conflicts" on page B-2.
Figure 3-4
Installing Software 3-4