Table of Contents
Advertisement
Auto Sensor Programs
This feature allows you to cook or reheat foods without entering the weight.
The built-in sensor measures the humidity of the food and calculates the
recommended microwave power level together with a suggested cooking time.
How it Works
Once the food has been selected and Start/Set pad tapped the food is
heated up. As food begins to get hot, steam is emitted. When the food
reaches a certain temperature and begins to cook, an even greater amount
of steam is released. The increase in steam emission is detected by a
humidity sensor in the oven. This acts as a signal for the oven to calculate
how much longer the food needs to cook. The remaining cooking time will
appear in the display window after two beeps. Whilst the sensor program is
still in the display window the oven door should not be opened. Wait until
the cooking time appears in the window, and then open the door if required,
to stir or turn the food.
1
2
3
4
5
62
Tap Auto Cook pad once.
Select the menu number by tapping the
. (No.4-9)
Tap the Start/Set pad to confirm the
selection.
Tap the Start/Set pad to start.
Adjust the taste by tapping the
with in 14 seconds. (Optional)
Advertisement
Table of Contents
