Panasonic NN-DF38PB Operating Instructions Manual page 56

Using the Timer
To set a standing time:
By using the Timer, you can program Standing time after cooking is
completed or use to program the oven as a minute timer.
1
2
3
4
Note
1. Three-stage cooking can be programmed including standing time.
2. If the oven door is opened during the standing time or minute timer,
the time in the display window will continue to count down.
3. If the programmed standing time exceeds one hour, the time will
count down in units of minutes. If less than one hour, the time will
count down in units of seconds.
4. This feature may also be used as a minute timer. In this case tap the
Timer, set time and press the Start/Set pad to start.
5. Standing time cannot be used after an Auto programs and Oven.
56
Select Cooking Mode & Time
Set the cooking program, by entering cooking
mode and time required.
Tap Timer pad once.
Set the standing time by tapping the
. (up to 9 hours).
Tap the Start/Set pad to start.