Listening To Tapes - Panasonic SC-AK47 Operating Instructions Manual

Table of Contents

Advertisement

Listening to tapes
|
Types of tapes which can be played correctly:
The unit automatically identifies the type of tape.
O
| \se_essas fay)
S-6/
pis:
<=
as
.
Se
i
|
NORMAL POSITION/TYPE |
K
HIGH POSITION/TYPE II
METAL POSITION/TYPE IV
You can use either deck 1 or deck 2 for tape playback.
i
Press [TAPE/DECK 1/2].
The power will come on automatically.
2 | Press (4 DECK 1 OPEN] or [ DECK 2 OPEN] and
insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
| Ej Press [REV MODE] to select the reverse mode.
Every time you press the button:
=
eC
ees
: One side is played, then playback stops automatically.
>
: Both sides (front side ~ reverse side) are played one
time each, then playback stops automatically.
C=): Both sides are played 8 times each, then playback stops
automatically.
4 | Press [<4] or [>] to start playback.
:
The forward side (front side) will play.
"@ : The reverse side will play.
5 | Adjust the volume level.
—_
~
_~
-_
Listen
opera
a
To stop tape playback
Press [Ml].
To change the deck to be used EY
Press [TAPE/DECK 1/2] to select the deck you want to use when you
load cassettes into both decks.
To listen to 2 tapes consecutively
Load a tape into each deck and select "C{*>". Both tapes will be
SP EISSRSE NONE ARES WAH SECA mh Ae Gin AGE EW Rs PGR; Bs sfc allt lee ety We beae eT Reid e
played 8 times each.
VOLUME
Note |
cow
SS uF
i
Playback is momentarily interrupted while playing back tapes, if you
open the other deck.
Fo
eas iI
'}|
|To fast-forward or rewind the tape EI
paeee----
"]
Press [H@<@/<4<@} or [>> PP] in the stop mode.
Tape direction
To rewind
To fast-forward
TAPE/
DECK 1/2
To find the beginning of a program E]
(TPS: Tape Program Sensor)
Press (@<@/<4<4] or [>>
P41] during play.
To play the current | To play the next
Tape direction
tune
from
the | tune
from
the
beginning
beginning
The TPS function searches for silent parts of about 4 seconds in
length which are normally found between tunes. As a result, it may not
function properly in the following cases:
©
With short silent parts
® When noise occurs between tunes
®
With silent parts found within tunes
RQT4738

Advertisement

Table of Contents
loading

Table of Contents