Panasonic SC-AK47 Operating Instructions Manual page 28

Table of Contents

Advertisement

Soe
eS)
ae
!
Vs
LE
thot
7%
'
A
at
t
RQT4738
Using the timer
Using the pithy dimer
Select this timer when you want to use the timer as an alarm clock.
You can wake up listening to music (CD, tuner, tape or aux) at a
desired volume level and time.
@
Make sure that you have completed "Setting the time" on page 11.
®
Switch on the power.
The figure shows how to set the play timer to play a CD from
6:30 a.m. to 7:40 a.m.
Press [CLOCK/TIMER] to select "OPLAY".
Every time you press the button:
CLOCK — @PLAY
— @REC
Ls Previous display a
"ON" time setting
(Within 8 seconds or so)
@) Press [V] or [A] to select the starting time.
@) Press [CLOCK/TIMER].
"OFF" time setting
@) Press [V] or [A] to select the ending time.
(2) Press [CLOCK/TIMER].
Source selection
Select the desired source and then prepare for
playing.
To play CD{s}
Press [CD] and insert CD(s).
If more than 1 CD is toaded
Press [DISC 1]-[DISC 5] to select the CD you want to hear first
and press (H}.
Disc selection does not become part of the timer memory.
To play tape(s)
Press [TAPE/DECK 1/2] and insert tape(s).
If tapes are loaded in both decks, playback will start from deck 2.
To play the radio
Press [TUNER/BAND] and tune in the desired station.
To play a unit connected to the "AUX" terminals
Press [AUX].
Play volume setting
Set the playback volume.
Press [OPLAY/OREC] to select "OPLAY".
Every time you press the button:
@PLAY -= O©REC
1 (OFF) ==
If the record timer has not been set
Each time it is pressed:
@PLAY «> off (no display)
[@PLAY/OREC] indicator lights up.
Press [©/l] to put the unit on standby before your
timer start time.
The timer play will start at the preset time with volume increasing
gradually up to the volume level you preset.

Advertisement

Table of Contents
loading

Table of Contents