Panasonic SC-AK47 Operating Instructions Manual page 17

4 5
COW :
~— 3
re =. i
ost | ql a :
Specified disc number
a
Specified track number
Program order
r
rT
t
'
4
'
'
.
Indicates
program mode
teas fo compact dises |
eS METiiel Messi ice] melaihy
You can program up to 24 tracks.
Press [CD].
Ensure CD is stopped.
Press [PROGRAN].
Press [DISC].
(within 10 seconds or so)
Press [1] — [5] to select the disc you want.
Press the numeric button to select the desired track.
Repeat steps EJ through EJ unti! you have pro-
grammed ail the tracks you want.
Press [>AI/A].
Play will start in the programmed sequence.
N)
To cancel program play mode
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
Pressing [ll] will cance! program play, but it will also erase the entire
program.
To select a two-digit track
Press [210] and then the two numbers you want.
When "CD FULL" appears EY
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
You can do the following during program mode EJ
®@ Check program contents.
Press [-@@/<@<@} or [>> >>}.
Every time you press one of the buttons, the track and program No.
are shown on the display.
@ Add to the program.
Repeat steps Ell through Ef.
® Cancel entries.
From the last Press [CANCEL].
programmed track
A specified track Select the track with (K@@/<@<@] or
only [> P41), and press [CANCEL] within
3 seconds.
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
To replay your program
If you tured OFF your program with [PROGRAM], you can play it
again as explained below.
1. Press [PROGRAM].
2. Press {>AI/A}.
If you program a track not on your CDs
The track is initially programmed, but during program play, the player
will skip that track and will continue playing from the next programmed
item,
Liste opera pe
ROT4738