Panasonic SC-AK47 Operating Instructions Manual page 22

[Recording from compact discs |
i Press [© DECK 2 OPEN], and insert the tape.
Close the holder by hand.
Tape direction is automatically set to ">".
p] Press [REV MODE] to select the reverse mode.
Every time you press the button:
Poe EMER Ls GRD |
~),CZ> =: Both sides (front side - reverse side) are
recorded, then recording stops automatically.
Press [CD}.
Insert CD in the tray.
(See page 14).
Press [DISC 1] — [DISC 5] to select the disc you
want.
Pressing [Hi] will stop playback.
Press [@ REC/STOP] to start recording.
® If you selected "Cy>" in step Ef, the direction will
automatically change to "<*>" when recording starts.
@ The recording will proceed from the first track on the selected
CD and will continue on through the last track of the final disc
(page 15).
@ The tape deck stops automatically when the CD is finished.
Recording operations a
To stop recording
® To add a 4 second silent interval before stopping
Press {B]. The CD will stop automatically too.
® To stop recording without a silent interval
Press {@ REC/STOP]}. The CD will stop automatically too.
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1. Press [TAPE/DECK 1/2] and select tape deck 2.
2. Press [<a] and immediately thereafter [I]. The tape direction will
be shown as "<]".
A ye ee i
r
'
'
{fram
t
4
ee ir To record from a specific point on a tape
Ee ieee ce ree eee eee eee eee oe Before recording, advance the tape to the point from where you want
to start-recording.
1. After step 45 program the track you want (perform steps B-G
on page 17).
2. Press [(@ REC/STOP}] to start recording.
RQT4&738