Mounting; Solids Applications - Siemens 7ML1105 Compact Operating Instructions

Installing/mounting

3.4 Mounting

3.4 Mounting
Note
• The transducer is to be used only in the manner outlined in this operating instructions.
• Normally, the transducer requires no cleaning or maintenance. However, if performance
changes are observed, immediately shut down the level measurement system and perform
a thorough inspection, especially on the transducer.
• An XPS-15F transducer is shown in these examples. An explosion proof conduit seal may not
be required.
3.4.1

Solids applications

①
②
③
20
XPS-15F,
XRS-5C
Easy aimer (typical model)
Safety chain
Transducer
XPS-10, XPS-15,
XPS-30, XRS-5
Compact Operating Instructions, 09/2021, A5E43390688-AC
ST-H
Transducers