Accessories - Kenwood TS-440S Instruction Manual

Model
Specifications
78-4408
LSB, USB, CW, FSK 6 dB 2.2 kHz
— 60 dB 4.4 kHz
Selectivity
AM
=6 46
8 kite
— 50 dB 18 kHz
FM -6 48 12 kHz
- 50 4B 25 kHz
j
100 kHz to 1.6 MHz
More than 50 4B
Image ratio
1.6 ta 30 MHz More than 70 dB
"oa
100 kHz to 1.6 MHz
More than 50 dB
__ | IF rejection
5
1.6 to 30 MHz
More than 70 eB
g | iF SHIFT variable range
More than +0.9 kHz
© | RIT/XIT variable range
More than +1 kHz
NOTCH filter attenuation
More than 20 dB {at 1.5 kHz}
100 to 150 kHz Less than 20 nV
LSB, USB, CW, AM,{ 150 to 500 kHz Less than 10,
Squeich sensitivity | FSK
600 kHz to 1.6 MHz
Less than 20 :.V
1.6 to 30 MHz Less than 2 .V
—M
1.8 to 30 MHz
Less than 0.32 .V
Output
1.5 W across 8 ohms load (10% distortion)
Output load impedance
4 to 16 ohms (both ext. speaker and phones}
Bs Frequency accuracy (at RIT/XIT off)
Less than +1
10-5
a:
£8] Frequency stability fat RIT/KIT off]
Less than +1x 10-5 (~ 10 to + 50°C)
Circuit and ratings are subject to change without notice due to development in technology.
9-2. ACCESSORIES
Dynamic microphone (Except Europe and U.K. T91-0352-05 | .
DC power cable assembly E30-1638-0
DIN plug (7-pin) .. E07-0751-05.
instruction manual B50-8048-10 .
instruction manual (U.K. only} B50-8049-10 .
Warranty card (U.S.A. only} B46-0410-00 .
42