Power - MSI MS-CF06 User Manual

Power

▶ Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off]
[Power On]
[Last State]
▶ Deep Sleep Mode
The setting enables or disables the Deep S5 power saving mode. S5 is almost
the same as G3 Mechanical Off, except that the PSU still supplies power, at a
minimum, to the power button to allow return to S0. A full reboot is required.
No previous content is retained. Other components may remain powered so
the computer can "wake" on input from the keyboard, clock, modem, LAN, or USB
device.
▶ PS/2, USB, LAN, PCIE PME
The setting allows the activity of the specified device to wake up the system from
power saving modes.
▶ RTC
When [Enabled], your can set the date and time at which the RTC (real-time clock)
alarm awakens the system from power saving modes.
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status before power failure or
interrupt occurred.
51
Power