MSI MS-CF06 User Manual page 45

» HECI Message Check Disable
This setting disables message check for BIOS boot path when sending messages.
» MBP HOB Skip
Setting this option will skip ME's Memory-Based Protection (MBP) H0B region.
» HECI2 Interface Communication
This setting Adds/ Removes HECI2 device from PCI space.
» KT Device
Enables or disables Key Transfer (KT) Device.
» End of Post Message
Enables or disables End of Post Message sent to ME.
» DOI3 Setting for HECI Disable
Setting this option disables setting DOI3 bit for all HECI devices.
» MCTP Broadcast Cycle
Enables or disables Management Component Transport Protocol (MCTP) Broadcast Cycle.
▶ Anti-Rollback SVN Configuration
» Automatic HW-Enforced Anti-Rollback SVN
Setting this item enables will automatically activate the hardware-enforced anti-rollback
protection based on the Secure Version Number (SVN). Once enabled, the hardware will
enforce that only firmware updates with an SVN equal to or higher than the current SVN
can be installed.
» Set HW-Enforced Anti-Rollback for Current SVN
Enable HW ERB mechanism for current ARB SVN value. FW with lower ARB-SVN will be
blocked from execution. The value will be restored to disable after the command is sent.
ill display when
This item w Automatic HW-Enforced Anti-Rollback SVN
is enabled.
45
Security