AEG OKO FAVORIT 8081 Operating Instructions Manual page 37

AUF'3. GB/UK
Setting Up:
The dishwasher must be positioned on a solid horizontal base. The feet of the
appliance can be adjusted by approx. 5 cm. This allows:
— uneven floors to be compensated for
— the height to be adjusted to match other furniture
If you are installing the dishwasher underneath a kitchen worksurface please
note the following points:
— sufficient space must be allowed for at the rear of the appliance to accommo-
date the drain hose, inlet hose and mains cable. They must not be kinked or
jammed behind the appliance.
— with integrated and decor fronted build-under appliances, please ensure that
the appliance is attached to the underneath of the kitchen worksurface or to
an adjacent unit. This is essential in order to ensure that it will not accidentally
tip forward.
Arranging a plinth strip for extra sound insulation
Arrange the plinth strip with adhesive side to assure a tidy floor finish.
Depending on the type of installation, the following installation proce-
dure must be followed:
Integrated Appliances (i models)
For installation see installation template provided.
37