AEG OKO FAVORIT 8081 Operating Instructions Manual page 19

KLOD (3) GB/UK
Setting the Rinse Aid Dispenser
The adjuster to alter the quantity of rinse aid being dispensed is located in the
opening of the dispenser. The quantity can be set from 1 to 6 (1-6 cm').
The dosage is pre-set to 4. At this setting the full dispenser will hold sufficient
rinse aid for 40 wash cycles. Do not alter this setting unless an unsatisfactory
rinse result makes it necessary (see "Troubleshooting'").
CJ To adjust the dispenser, turn the locking lid of the rinse aid dispenser a quarter
of a turn anti-clockwise and open. (Fig. 5)
C Turn the adjuster to the desired setting using a screwdriver
HE ISEB ne!
Fig. 7
(©) Replace the locking lid and tighten in a clockwise direction.
(J Wipe away any excess rinse aid with a cloth, otherwise too much foam
will build up during the wash.
19