Pioneer PL-560 Service Manual page 20

PL-560
e Mechanism Ass'y Attachment e PU Plate Attachment
1. PU plate shaft position confirmation Push the PU plate into place so that the PU
When attaching the arm base section to the plate bearing section touches the revolution shaft
mechanism section, put the mechanism section attachment nut. Installation direction is as shown
switch locker and switch lever in the locked posi- in Fig. 11-15.
tion and verify that the tonearm is in the arm rest
location. Also check that the PU plate shaft is in
the position shown in Fig. 11-13.
PU plate shaft
Switch locker
Fig. 11-13 Arm base attachment EA patents
Fig. 11-15 PU plate attachment
2. PU lead wire position confirmation
When attaching the mechanism ass'y to the.
panel, be careful that the PU lead wire is not
pinched at the panel boss as shown in Fig. 11-14.
Fig. 11-14 PU lead wire attachment