Bose L1 Pro8 Owner's Manual page 17

PRO.BOSE.COM
Problem
Paired Bluetooth®
device will not connect
to the loudspeaker
Excessive hum when
daisy-chaining multiple
units
Owner's Guide • L1 Pro8/Pro16 Portable Line Array System
What to do
• If your paired device requires a passcode, make sure the one you entered is
correct.
• Make sure Bluetooth® functionality is turned on or enabled on your source
device.
• Your Bluetooth device may be out of range; try moving it closer to the L1 Pro.
• If possible, turn off all other nearby Bluetooth devices or disable their
Bluetooth functionality.
• Clear the loudspeaker memory or pair to a new device by pressing and
holding the Bluetooth Pair Button for ten seconds. Delete the L1 Pro from the
Bluetooth device's memory. Pair the Bluetooth device with the L1 Pro again.
• Turn the power off and back on; then try re-pairing your device.
• Ensure the volume on the daisy-chained unit(s) is not set too high.
Care & Maintenance
English • 17