Chapter 5 Alarm - UNI-T UTE9800+ Series User Manual

User's Manual
: Display the numerical value after linear average of m item data from the n-(m-1) to the n th order
D
n
M : The numerical value data of n-(m-1) order

n （ m 1 - ）
: The numerical value data of n-2 order
M
n - 2
: The numerical value data of n-1 order
M
n 1 -
: The numerical value data of n- order
M
n
M: The number of average
4.6 Data Update Cycle
Steps
1. Press【SETUP】key to enter SETUP menu，press【 】or【 】key (for UTE9806+:【▲】or【▼】key)
to select submenu"u.rate"as shown in the following figure；
2. Press【ENTER】 / 【OK】key to enter the next option, and the press【▲】 or【▼】 key to switch 0.1, 0.25,
0.5, 1, 2, 5;
3. Press【ENTER】/【OK】key to select the currently selected option and save the setting；
4. Press【SETUP】key to exit SETUP menu.
··Explanation
The data update cycle is the update interval of the sampled data of the measurement function.
The data update cycle can set to 0.1s, 0.25s, 0.5s, 1s, 2s or 5s. The default is 0.25s.

Chapter 5 Alarm

5.1 Upper/Lower Limit of Current and Power (UTE9802+/UTE9811+)
·Steps
1. Press 【 SETUP】 key to enter SETUP menu， press 【 】 or 【 】 key to select one of submenu"A-Hi","A-Lo" ,
Instruments.uni-trend.com
UTE9802+/UTE9811+ u.rate interface
UTE9800+ Series Smart Digital Power Meter
UTE9806+u.rate interface
33 / 55