General Description; I/O Description; O Description - Texas Instruments bq24650EVM User Manual

Synchronous, switch-mode, battery charge controller for solar power
Hide thumbs Also See for bq24650EVM:
Table of Contents

Advertisement

Introduction
Resistor-programmable up to 26-V battery voltage
Input operating range: 5 V–28 V
LED indication for charge status
Test points for key signals available for testing purposes; easy probe hook-up.
Jumpers available; easy-to-change setting
1.2

General Description

The bq24650 is a highly integrated switch-mode battery charge controller. It provides input voltage
regulation, which reduces charge current when input voltage falls below a programmed level. When the
input is powered by a solar panel, the input regulation loop maintains the panel at maximum power output.
The bq24650 offers a constant-frequency, synchronous PWM controller with high-accuracy current and
voltage regulation, charge preconditioning, charge termination, and charge status monitoring.
The bq24650 changes the battery in three phases: preconditioning, constant current, and constant
voltage. Charge is terminated when the current reaches one-tenth of the fast charge rate. A
programmable fast-charge timer provides a safety backup. The precharge timer is fixed at 30 minutes.
The bq24650 automatically restarts the charge cycle if the battery voltage falls below an internal threshold
and enters a low, quiescent-current sleep mode when the input voltage falls below the battery voltage.
The bq24650 supports the battery from 2.1 V to 26 V with VFB set to a 2.1-V feedback reference. The
charge current is programmed by selecting an appropriate sense resistor. The bq24650 is available in a
16-pin, 3.5x3.5 mm
For details, see the bq24650 data sheet (SLUSA75).
1.3

I/O Description

Jack
J1–VIN
J1–PGND
J2–VSYS
J2–VOUT
J2–PGND
J2–TS
2
bq24650EVM Synchronous, Switch-Mode, Battery Charge Controller for
Solar Power
2
, thin QFN package.
Table 1. I/O Description
Description
Positive input
Negative input
Connected to system
Connected to charger output
Ground
Temperature qualification voltage Input
Copyright © 2010, Texas Instruments Incorporated
SLUU444A – August 2010 – Revised October 2010
Submit Documentation Feedback
www.ti.com

Advertisement

Table of Contents
loading

Table of Contents