Manual Tv Channel Search; Satellite Receiver - Philips 14PV211 Manual

Manual TV channel search

In certain cases the 'Automatic TV channel search' may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a
Press the button on the remote control. The main
MENU
menu will appear.
b
Select the line '
Installation
AP q button and confirm with the
c
Select the line '
Manual store
AP q button and confirm with the
MANUAL STORE
Channel/Frequency
Search
Fine tuning
Name edit
Programme number
Decoder
ã Exit:
« press MENU
d
In the line '
Channel/Frequency
display for:
' ': frequency
FREQU.
' ': channel
C CH
' ': special channel
S CH
e
If you know the frequency or channel of the desired TV
channel, you can enter the data in line '
the digit buttons .
0-9
D If you don't know the frequency or channel of the TV
channel of your choice, press the
start the channel search.
f
In the line '
Programme number
programme number you want e.g.: '
or button.
DSr SqC
g
If you want to change the TV channel name, press the
SqC button in line '
Name edit
E Select the character you want to change with the
DSr or the SqC
with the BP r or the
character in the same way.
h
To confirm the information, press the
6
' with the BP r
SqC button.
' with the
BP r
SqC button.
FREQU.
123
(,,,,=,,,,$
xxx
01
OFF
', select the
' with
Search
SqC button to
' select the
', using the
01
'.
button. Change the character
AP q button. Select the next
button.
OK
i
If you want to change the automatic tv channel setting,
select the line '
Fine tuning
With the DSr
automatic tv channel setting. Important: This re-tuning is
only necessary and useful in special cases, e.g.: when
there are stripes on the picture with cable-TV systems.
j
Press the button to store the TV channel.
OK
D If you want to search for further TV channels, start
again at step
or
k
To end, press the
D If you have programmed a recording (TIMER), a
or
wake-up timer or a sleep-timer, you can't select the
function '
Manual store

Satellite receiver

You can receive channels from the satellite receiver via the
scart socket .
EXT. 1
To do this, select the channel number '
button. You will have to select the channels to be received by
the satellite receiver on the receiver itself.
'.
or SqC button you can vary the
e
.
button.
MENU
'.
' with the
E1
P p