Playback Functions; Playing A Cassette; Playing An Ntsc Cassette; Tape Position Indication - Philips 14PV211 Manual

5.

PLAYBACK FUNCTIONS

Playing a cassette

a
Put a cassette into the cassette slot.
b
Press the button.
PLAY G
E If you press the
STOP h
Combi will switch to pause. To stop, press the
button again.
E To eject the cassette, press the
TV-VIDEO Combi or press the
remote control several seconds.
D Before transportation, make sure that no cassette is
in the TV-VIDEO Combi.
D If you insert an erase protected cassette, the
TV-VIDEO Combi will automatically start playback.
D Some hired cassettes may have poor picture or
sound quality. This is not a fault in your machine.
Please read 'Eliminating picture interference'.
D Some functions will automatically switch off after a
while (for example, pause, still picture, picture
search). This helps to protect the cassette and
avoids wasting power.

Playing an NTSC cassette

With this set you can play cassettes that have been recorded
on another video recorder in the NTSC standard (for example,
American cassettes).
D Some special features (for example, still picture) are not
possible while you are playing an NTSC cassette.

Tape position indication

D Press the
button to display the current tape position.
OK
Searching for tape position with the picture
(picture search)
a
While a cassette is playing, press the
I (forward) button once or several times.
b
To stop at a certain picture, press the
D During picture search, the picture quality may not be
so good and there will be no sound.
14
button once, the TV-VIDEO
STOP h
? button on the
STOP h button on the
H (reverse) or
PLAY G button.

Still picture

a
Press the button. A still picture will appear on
STILL R
the screen.
b
Each time you press STILL R
move on one step.
Searching for tape position without the
picture (wind and rewind)
a
Stop the tape with the
b
Press the H (reverse) or
c
To stop at a certain picture, press the

Instant View

With this function you can switch to picture search during
wind and rewind.
a
If you hold the (rewind) or
H
during wind or rewind, you will switch to picture search.
b
When you release the button, the TV-VIDEO Combi will
automatically switch back to rewind or wind.
Automatic search for a tape position
(index search)
At the start of each recording, the TV-VIDEO Combi will write
an index code on the tape.
a
Press the button. Press the
INDEX E
select the next code mark or the
previous code mark.
b
When the TV-VIDEO Combi finds the code mark, it will
automatically switch to play.
again, the picture will
STOP h button.
I (forward) button.
button.
STOP h
(wind) button
I
button to
I
H button for the