How To Check Or Change A Timer - Philips 14PV211 Manual

D When you are recording, the red recording light at
the front panel of the TV-VIDEO Combi will be lit.
f
Confirm with the button when the information is
OK
correct.
E '
Press STANDBY to start recording
will appear in the display. If the programmed recording
should start within the next few minutes, press
STANDBY m . If the programmed recording should start at
a later point in time, press the
D A programmed recording can only start when the
machine is switched to standby.
D If you entered the wrong date for a daily/weekly
recording, your TV-VIDEO Combi will correct it
automatically.
g
If you have confirmed with the
TIMER s button to exit the menu.
D The programming information has been stored in a
TIMER block.
h
Make sure that the cassette you have put in can be
recorded on.

How to check or change a TIMER

a
Press the button on the remote control.
TIMER s
b
Select the line '
TIMER PROGRAMMING
menu buttons BP r or
button.
SqC
c
Select the TIMER you want to check or change with the
BP r or AP q button and confirm with the
button.
d
Select the entry field with the
button.
e
Change any information with the
button or with the buttons.
0-9
D Under '
', use the
LP
select the recording speed 'SP' or 'LP'.
f
Confirm with the button.
OK
g
To end, press the TIMER s
h
Make sure that the cassette you have put in can be
recorded on.
'
button.
OK
button, use the
OK
' with the
AP q and confirm with the
OK
DSr or SqC
or
BP r AP q
BP r or AP q button to
button.
How to clear a TIMER
a
Press the TIMER s button on the remote control.
b
Select the line '
TIMER PROGRAMMING
menu buttons BP r or
SqC button.
c
Select the TIMER you want to clear with the menu
buttons BP r or AP q
d
Press the button.
CLEAR
e
Switch off with the
TIMER s
' with the
AP q and confirm with the
.
button.
19