Table of Contents
Advertisement
Using the Web-Based Advanced User Interface
1.
Wi-Fi Protected Setup (WPS): Enabled or Disabled .
2.
P ersonal Identification Number (PIN) Method: In this method,
a wireless client wishing to access your network must supply
a 4- or 8-digit PIN to the Router. After clicking "Enroll", you
must start the WPS handshaking procedure from the client
within two minutes .
3.
R outer PIN: If an external registrar is available, you may enter
in the Router's PIN to the registrar. Click "Generate New PIN"
to change the PIN from the default value. Click "Restore Default
PIN" to reset the PIN value.
4.
Push Button Configuration (PBC) Method: PBC is an alternate
method to connect to a WPS network . Push the PBC button
located on the back of the Router for three seconds, and then
initiate the PBC on the client device . Alternatively, push the
"Start PBC" soft button to start this process .
5.
Manual Configuration Method: This section lists the default
security settings to be set up if not using WPS .
46
46
(1)
(2)
(3)
(4)
(5)
Advertisement
Table of Contents
