Table of Contents
Advertisement
Connecting and Configuring your Router
Step 1
Hardware Connections – Follow the Quick Installation
Guide (QIG)
A.
Unplug your modem's power
cord . Put the Router next to
the modem . Raise the
Router's antennas .
B.
Locate the networking cable
that connects your modem and
computer . Unplug that cable from
your modem, and plug it into
any gray port on the back of
the Router .
C.
Find your new networking cable
(included in the box with your
Router) and connect it to the
yellow port on the back of the
Router . Connect the other end to
your modem, in the port that's
now free .
D.
Plug in your modem's power cord .
Wait 60 seconds for the modem to
start up . Plug the Router's power
supply into the black port on the
back . Plug the other end into the
wall outlet .
E.
Wait 20 seconds for the Router to
start up . Look at the display on
the front of the Router . Make sure
the "Wired" and "Router" icons
are lit up in blue. If they are not,
recheck your connections .
15
1
2
3
4
5
6
7
8
9
10
Advertisement
Table of Contents
