Table of Contents
Advertisement
Using the Web-Based Advanced User Interface
Using the Bandwidth Switch
This switch allows you to set the Router's wireless bandwidth modes .
There are several modes available:
1)
20MHz only
Setting the Router to this mode allows only 20MHz operation . This
mode is compatible with N, draft 802 .11n-, 802 .11g-, and
802 .11b-compliant devices, but will limit N, draft 802 .11n-compliant
devices' bandwidth by half . Reducing bandwidth to 20MHz-only
operation might solve some wireless problems .
2)
20MHz/40MHz Auto
Setting the Router to this mode allows it to switch automatically
between 20MHz and 40MHz operation . This mode enables 40MHz
operation, to maximize speed for N, draft 802 .11n-compliant
devices when conditions permit . When a legacy 802 .11g access
point is presented and occupies an adjacent secondary channel,
the Router automatically reverts to 20MHz operation to maximize
compatibility . We recommend using this as the default mode .
43
1
2
3
4
5
6
7
8
9
10
Advertisement
Table of Contents
