Using The Remote Instruction Code - BellSouth GH5860 Owner's Manual

5860 man.qxd 11/7/2003
Answering System Operation

Using the Remote Instruction Code

1. Dial your telephone number.
2. Listen to or bypass the OGM in the PRIMARY MAILBOX.
3. Enter your Remote Access Code. If the announcement does not stop, enter the Remote
Access Code again.
4. The Answering System will request that you enter the Instruction Code or press the "0"
button for help.
A. If you do not know the Instruction Code, press the "0" button immediately. The Answering
System will announce the Instruction Codes. Otherwise, if a command is not received by
the Answering System within 10 seconds, it will automatically hang up.
The following is the Remote Instruction Code Help Menu:
Instruction Codes
To playback message press "2."
To repeat message press "1."
To skip message press "3."
To stop press "4."
To playback announcement press "5."
To record memo press "6."
To record announcement press "7."
To turn answering machine Off or On press "8."
To erase message press "9."
(Press "1" for MAILBOX 1, press "2" for MAILBOX 2, press "3" for MAILBOX 3, and
press "4" for MAILBOX 4. Otherwise, if you did not press the desired MAILBOX #
location within 5~6 seconds, the Answering System will automatically hang up.)
To change mailbox press "*."
B. Press the corresponding number of the Instruction Code you wish to activate. You don't
have to listen to the entire Instruction Code Help Menu before giving a command. You
may enter the desired Instruction Code Number at any given time.
5:48 PM Page 46
37
Speakerphon