www.ti.com
2.9 Connecting the AWR2544LOPEVM to the DCA1000 EVM
The AWR2544LOPEVM can be connected to the
Figure 2-21
shows the AWR2544LOPEVM interfaced to the DCA1000 EVM.
When using the AWR2544LOPEVM with the DCA1000 EVM, the following settings must be used.
1. Set the AWR2544LOPEVM to SOP2 mode.
SPRUJB0 – NOVEMBER 2023
Submit Document Feedback
DCA1000 EVM
Figure 2-21. AWR2544LOPEVM and DCA1000 EVM
Copyright © 2023 Texas Instruments Incorporated
platform to allow for LVDS data streaming.
AWR2544LOP Evaluation Module
Hardware
21