Audio Jack Board - HP ENVY x360 Maintenance And Service Manual

3. Detach the audio jack board cable (3) from the computer. The audio jack board cable is attached to
the computer with double-sided tape.
4. Remove the audio jack board cable.
To replace the audio jack board cable, reverse the removal procedures.

Audio jack board

To remove the audio jack board, use this procedure and illustration.
Table 5-12 Audio jack board description and part number
Description
Audio jack board (includes audio jack)
NOTE: The audio jack board spare part kit does not include the audio jack board cable. The audio
jack board cable is available using spare part number N41012-001.
Before removing the audio jack board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the audio jack board cable (see
Remove the audio jack board:
1. Remove the two Phillips M2.0 × 2.7 screws (1) that secure the audio jack board to the computer.
Preparation for disassembly on page
Bottom cover on page
Battery on page 31).
Audio jack board cable on page
30).
52).
Spare part number
N41016-001
30).
Audio jack board 53