HP ENVY x360 Maintenance And Service Manual page 50

14. To remove the hinges and hinge caps:
a. Remove the display panel assembly.
b. Release the display panel cable (1) and the camera module cable from the left hinge area.
c. Release the wireless antenna cables (2) from the right hinge area.
d. Remove the six M2.5 × 3.3 screws (3) that secure the hinges to the display back cover.
e. Remove the hinges (4).
The hinges are available using spare part number N41014-001.
f. Remove the M2.0 × 3.3 screw (1) that secures the hinge cap to each hinge.
g. Remove the hinge caps (2).
The hinge caps are available using spare part number N41015-001.
44 Chapter 5 Removal and replacement procedures for authorized service provider parts