Battery - HP ENVY x360 Maintenance And Service Manual

Before removing the bottom cover, prepare the computer for disassembly (see
disassembly on page
Remove the bottom cover:
1. Close the computer and rest it upside down on a flat work surface with the front toward you.
2. Remove the four Torx6 M2.0 × 6.3 screws (1) that secure the bottom cover to the computer.
3. Insert a thin, plastic tool, such as a case utility tool (2), into the display hinge areas and release the
rear edge of the bottom cover from the computer.
4. Slide the rear edge of the bottom cover (3) up and away from the computer, and then remove the
bottom cover.
To replace the bottom cover, reverse the removal procedures.

Battery

To remove the battery, use this procedure and illustration.
Table 5-2 Battery description and part number
Description
3 cell, 43 Whr, Li-ion battery (includes cable)
WARNING!
not puncture, twist, or crack the battery.
● Do
not cause an external puncture or rupture to the battery. They can cause a short inside the
● Do
battery, which can result in battery thermal runaway.
not handle or touch the battery enclosure with sharp objects such as tweezers or pliers, which
● Do
might puncture the battery.
30).
To avoid personal injury and damage to the product:
Preparation for
Spare part number
M24648-011
Battery 31