Unpacking Your Dryer; Tools And Materials Required - Haier HLF11PC User Manual

iNSTALLATION _NSTRUCTJ©NS
Select a suitable location for the dryer on a hard even surface away from direct
sunlight or heat source e.g. radiators, baseboard heaters, cooking appliances
etc. Any floor unevenness should be corrected with the leveling legs located on
the
bottom of the dryer.
Unpacking Your Dryer
1. Remove all packaging material. This includes the foam base and all
adhesive tape holding the dryer accessories inside and outside.
2. Inspect and remove any remains of packaging, tape or printed
materials before using the dryer.
Tools and Materials Required
• Phillips head and flathead screwdrivers
Channel-lock adjustable pliers
® 1/2
inch open end wrench
Carpenter's level
Measuring tape
Duct tape
Rigid or flexible metal 4 inch (10.2 cm) duct
16