Load Clothes Into Dryer; Auto Dry Cycle - Haier HLF11PC User Manual

Load Clothes into Dryer
Auto Dry Cycle and Timed Dry Cycle
• The appropriate load is 1/3 to 1/2 of the drum volume. Avoid to overload the
dryer, as space is needed to allow clothes to tumble for uniform and wrinkle
proof drying.
When drying big articles, only 2-3 pieces should be loaded at a time and
supplemented with medium and small articles.
Avoid excessive drying of clothes to prevent wrinkles, shrinkage, roughness,
electrostatic charge accumulation and lint.
Avoid high temperature drying on delicate and synthetic clothes.
Rack Dry cycle:
WARNING: In Rack Drying mode, remember the drum is still rotating. If drying
rack is not in place, rotating inner tub could collide with drying rack and causes
damage to the dryer and drying rack.
This program is designed specially for articles like sports shoes. During dry-
ing please make sure the items stay on the rack with no risk of entanglement
while the drum is rotating.
Auto Dry Cycle
i_ _,_ ¸
llil ©........
@ Rack d,y
1. Press "Power On/Off" button to power on
• Turn on the power, the computer board beeps once and the dryer transfers
from off status to the stand by status (Normal program).
• If no "Start/Pause" button is pressed in 5 min after powering on, it automati-
cally cuts off power and returns to off status.
• It returns to off status immediately upon end of a cycle; Whatever status the
computer board is (start, pause, alarm, etc.), pressing "Power On/Off" button
will stop all operations and it enters off status.