Fluke TiX870 User Manual page 50

TiX870, TiX875, TiX880, TiX885,
TiX875U, TiX885U, TiX1060, TiX1080
Users Manual
Item
Reset
The Imager
information
If you forget to modify some parameters during the test and it affects the imaging
and temperature measurement accuracy, use Restore to factory defaults to reset
the parameters to factory defaults. The Imager automatically restarts after the
parameters are restored to default settings.
To delete all test data from the Imager, use Delete all files, the Imager deletes all
the files in the storage and the files cannot be recovered, then the Imager
automatically restarts.
46
Table 16. Settings Menu (cont.)
Options Description
Prompts when Set the prompts when saving images:
saving



Storage location The storage location can be set to the internal storage or an external
SD card.
When there is no memory card, this option is grayed out and cannot
be modified.
Internal storage Display the current internal storage usage.
External storage Display the current storage usage of the SD card.
Uninstall the SD To remove the SD card from the Imager, tap Uninstall SD card, to
card prevent data loss and damage to the SD card.
Restore to factory Parameters are reset to factory default settings.
defaults
Delete all files Delete all saved files
Model Model information
Serial Number Serial number
Software version Software version information
System version information
System version
The Imager Version information for the Imager
version
Lens Lens focal length.
Status Status information.
information
Upgrade the system (upgrade package file is required).
System upgrade...
Floating window. (default) After a thermal image file is captured
and saved, the current interface shows the file information for 1
to 2 seconds.
None. There are no prompts when a thermal image is captured
and saved.
Dialog. After a thermal image file is captured and saved, the file
information shows in a dialog box. Tap other areas of the screen,
or push , to close the dialog box.
Note
Note