Measuring Tools - Fluke TiX870 User Manual

To adjust transparency:
1. In the PIP mode menu, tap
The System menu is replaced by the Transparency Adjustment icon and the current value is
shown. The adjustment range is 0 to 1.0.
2. Tap to reduce the transparency of an infrared image or
of an infrared image according to field measurement requirements. 0 indicates the infrared image
is completely transparent, 1.0 indicates the infrared image is completely opaque.
3. Tap X to complete the transparency adjustment settings.
In the picture-in-picture (PIP) mode, make sure that the Imager is accurately
focused. Otherwise, the temperature measurement accuracy of the Imager is
affected.

Measuring Tools

The Imager has a set of measuring and analysis tools, such as the measurement of
maximum/average/minimum temperatures and temperature differences in a specific area.
To access the Measuring Tools menu, tap
from the System menu, as shown in
No. Tool Description
Select
a
Select an appropriate ROI.
Circle (Ar)
b
Add a measurement area of circle.
Rectangle (Ar)
c
Add a measurement area of rectangle.
Line (Li)
d
Add a line measurement.
.
Figure
1 2 3
Figure 20. Measuring Tools
Table 13. Measuring Tools
Note
(left Shortcut Menu Area) of the Home screen, or tap
20.
4 5 6
Thermal Imagers
System Menu
to increase the transparency
7
35