Fujitsu ESPRIMO D7 Series Operating Manual page 58

System expansions
Removing a drive
► Remove the casing cover (see chapter
► Fold out the drive cage (see chapter
► Disconnect any cables that are connected to the drive.
► Undo the screws (1).
► Push the drive a few centimetres out of the bay in the direction of the arrow (2).
► Pull the drive completely out of the bay in the direction of the arrow (3).
► Fold the drive cage into the closed position again (see chapter
► Fit the casing cover onto the casing again (see chapter
If necessary, you must adjust the entry for the drive accordingly in the BIOS Setup.
54
"Removing the casing cover", Page
"Opening the drive cage", Page
3
"Reattaching the casing cover.", Page
34).
45).
2
1
"Closing the drive cage", Page 46).
35).
Fujitsu