Fujitsu ESPRIMO D7 Series Operating Manual page 55

► Slide the drive with the EasyChange rails into the bay (1). Check that the component side of
the drive faces downwards towards the base of the casing (with the drive cage closed).
► Connect the cables at the drive and at the mainboard. Make sure the polarity is correct.
► Fold the drive cage into the closed position again (see chapter
► Fit the casing cover back onto the casing (see Chapter
If necessary, you must adjust the entry for the drive accordingly in the BIOS Setup.
Fujitsu
"Closing the drive cage", Page
"Reattaching the casing cover.", Page
System expansions
1
46).
35).
51