Fujitsu ESPRIMO D7 Series Operating Manual page 43

Do not discard the filler panel. Depending on the desired configuration level, you must
reinstall the filler panel for cooling, protection against fire and in order to comply with EMC
(electromagnetic compatibility) regulations (see
► Insert the new drive cover into the casing cover from the front. In doing so, make
sure that all the inner catches that are present engage (a, b).
► Change the desired drives as required, as described in the corresponding chapter.
► Fit the casing cover onto the casing again (see chapter
Fujitsu
System expansions
""Removing a slimline drive", Page
a
b
a
"Reattaching the casing cover.", Page
43").
b
2
35).
39