Fujitsu ESPRIMO D7 Series Operating Manual page 48

System expansions
► Slide the drive plate (a) into the upper bay (5) again as shown, until it engages.
It is essential to ensure that the drive plate is installed in the correct
installation direction (see illustration).
► If you are not installing a new slimline drive, change the drive cover (see
chapter "Changing the drive cover", Page
► Fit the casing cover back onto the casing (see Chapter
If necessary, you must adjust the entry for the drive accordingly in the BIOS Setup.
44
37).
"Reattaching the casing cover.", Page
1
5
a
35).
Fujitsu