Replacing The Grass Deflector - Toro 74943 Operator's Manual

Figure 119
Rear-Discharge Machines
1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ensure that the belt-guide
tab hits against the pivot
hub.
7. Remove and retain the hardware on both sides
of the deck as shown in
g024146
5. Belt guide
6. Spring-loaded idler pulley
7. Square hole in the idler
arm for the ratchet
8. Spring
Figure 120.
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the shoulder bolt and nut.
4. Remove the shoulder bolt and nut.
8. Raise the deck struts and secure them in the
raised position.
9. Slide the deck out to the right side of the
machine.
Replacing the Grass
Deflector
Side-Discharge Machines Only
WARNING
An uncovered discharge opening could allow
the machine to throw objects toward you or
bystanders, resulting in serious injury. Also,
contact with the blade could occur.
Never operate the machine unless you install
a mulch plate, discharge deflector, or grass
collection system.
1. Remove the locknut, bolt, spring, and spacer
holding the deflector to the pivot brackets
(Figure 121).
2. Remove the damaged or worn grass deflector
(Figure 121).
73
Figure 120
g010252