Table of Contents
Advertisement
Figure 61
1. Pull this tab out to the
side in the direction of the
arrow
2. Pull the shroud off this
frame tab in the direction
of the arrow
4.
Remove the spark plug.
Figure 62
g009922
g009919
3. Pull the shroud off this
frame tab in the direction
of the arrow
4. Shroud
g008803
g027478
5.
Install the left hydraulic-unit shroud
Checking the Spark Plug
Important:
Replace the spark plug(s) when it
has: a black coating, worn electrodes, an oily film,
cracks or reuse is questionable.
If you see light brown or gray on the insulator, the
engine is operating properly. A black coating on the
insulator usually means that the air cleaner is dirty.
Set the gap to 0.76 mm (0.030 inches).
Installing the Spark Plug
Tighten the spark plug(s) to 24.4 to 29.8 N-m (18 to
22 ft-lb).
46
(Figure
Figure 63
Figure 64
61).
g027479
g028109
Advertisement
Table of Contents
