Table of Contents
Advertisement
Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.5, No. 11)
Serial ATA3 Connector
Right Angle:
(SATA_1:
see p.5, No. 13)
USB 2.0 Header
(9-pin USB_3_4)
(see p.5, No. 9)
Chassis Fan Connectors
(4-pin CHA_FAN1)
(see p.5, No. 4)
(4-pin CHA_FAN2)
(see p.5, No. 12)
18
PLED-
SPEAKER
DUMMY
PLED+
PLED+
DUMMY
+5V
1
DUMMY
GND
GND
P+
P+
P-
P-
USB_PWR
USB_PWR
1
4
3
2
1
FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
1
GND
2
FAN_VOLTAGE
3
CHA_FAN_SPEED
4
FAN_SPEED_CONTROL
Please connect the
chassis power LED and
the chassis speaker to this
header.
This SATA3 connector
supports SATA data
cables for internal storage
devices with up to 6.0
Gb/s data transfer rate.
There is one header on
this motherboard. This
USB 2.0 header can
support two ports.
Please connect fan cables
to the fan connectors and
match the black wire to
the ground pin.
Advertisement
Table of Contents
