Section C; Fuel Guide - Toyostove Laser 60AT Installation And Operation Instructions Manual

Laser clean heating system/vented heater
Table of Contents

Advertisement

SECTION C:

FUEL GUIDE

The Toyostove Laser 60AT is designed for use with clear or red dyed ASTM D3699 1-K Kerosene. Use of low-
quality kerosene will cause burner performance to drop, leading to abnormal combustion and reduced
heater life.
Purchase only ASTM D3699 1-K kerosene in non-red cans reserved exclusively for kerosene and marked
accordingly with the word "KEROSENE". Always store your kerosene in a separate area from where you
store gasoline for your power equipment to avoid accidental use of gasoline in your heater.
What to Buy . . .
ALWAYS :
Crystal clear or red dyed, high-quality ASTM D3699 1-K
Kerosene.
Kerosene free of contaminants, water or cloudiness.
ALWAYS :
Gasoline, alcohol, white gas, camp stove fuel or additives.
NEVER :
NEVER :
Yellow or sour-smelling fuel.
How to Store It . . .
ALWAYS :
Store in a clean container, non-red in color, clearly marked
KEROSENE.
ALWAYS :
Store away from direct sunlight, heat sources or extreme tempe-
rature changes.
In a glass container, or one that has been used for other fuels.
NEVER :
NEVER :
For longer than six months. Begin each heating season with
fresh kerosene; discard at the end of season.
In the living space.
NEVER :
Why It is Important . . .
Pure, clean kerosene is essential for safe and efficient heater operation. Poor
quality or contaminated kerosene can cause:
¡Excess tar deposits on burner and flue pipe
¡Incomplete combustion
¡Reduced heater life
Use of a highly volatile flammable fuel such as gasoline can produce
uncontrollable flames, creating a severe fire hazard.
GAS
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents