Selecting
the Audio
OUT sound
This feature allows you to select the sound sources (MAIN and PIP)
that are output from the Audio OUT jacks.
This is useful when ampli_'ing or recording the PIP sound with
external equipment while hearing the sound of"the main picture with
the built in speakers.
To select tile Audio OUT sound:
1. Press MENU, then press _ orb" until tile AUDIO menu
appears.
2. Press • or • to highlight AUDIO OUT.
3. Press < or 1_ to select MAIN sound or PIP sound.
_AUD_O
$B$
ON
$B$
LEVEL
_00
• MAIN : Main picture sound you are now watching.
• PiP
: Selected PIP sound.
Using the StableSound
TM
feature
The StableSound'" feature limits the high volume level to prevent
extreme changes in volume when the signal source is changed.
To turn on the StableSound feature:
1. Press MENU, then press < orb" until tile AUDIO menu
appears.
2. Press • or • to highlight STABLE SOUND.
3. Press < or 1_ to select ON.
-MENu
Note:
When the Stab/eSound
TM
feature isturned on,
the surround teatuf_ is automatica//y turned
off I_eepage 44)
_A_D_O
$8S
LEVEL
8O
SPEAKERS
ON
To turn off'the StableSound feature:
Choose OFF in step 3 above.
47