Toshiba COLOASTREAM 43AX60 Owner's Manual page 25

To check and adjust the color convergence:
1. Press MENU, then press "_ or I_ until the PICTURE menu
appears.
2. Press • or • to highlight CONVER(;ENCE.
MOOE SPORTS
FLESH TONE ON
N©ESE REDUCTION OFF
COLOR
3. Press _ o1" I_ to display the center CONVERGENCE menu.
+
_BLUE
ENTER;TO SELECT C©L©R
E×_T ;TO SELECT POS_T_ON
If you see separate colored lines, ?_u have to adjust the
convergence.
4. Press ENTER to highlight RE[) or BLUE.
5. Press • (up), • (down), "_ (left), or 1_ (right) on the remote
control to converge the red or blue line into the green line. When
color convergence is correctly adjusted, you will see two single
crossed white lines.
6. Press EXIT to display the circumference CONVERGENCE
Illentl.
7. Press the corresponding Number button (1-9) to select the area
you want to adjust.
+
8. Press ENTER to highlight RED or BLUE.
4-
RED r_IITr_
ENTER:TO SgLECT COLOR
EXiT ;TO SELECT POS_T_ON
9. Press ••41_ to converge the red or bhle line into the green line.
Repeat steps 8 and 9 until you see two single crossed white lines.
10. Press EXIT once to select another area to adjust, then repeat
steps 7 through 9.
11. Press EXIT twice to close the CONVERGENCE menu.
25