Display Language; Oil Thetv - Toshiba COLOASTREAM 43AX60 Owner's Manual

Changing the on-screen display language
You can choose fiom three different languages (English, French and
Spanish) for the on-screen displays. Adjustment menus and messages
will appear in the language of your choice.
To select a language:
1. Press MENU, then press _ or I_ until the SET UP mentl appears.
2. Press • or • to highlight LANGUAGE.
_SET UP
ANTI/2 ANTI
TViCABLE CABLE
CN PROGRAM
ADD/ERASE ADD
3. Press "_ or I_ to highlight your desired language.
Selecting the antenna input
_%u can connect to two different signal sources hv choosing the
antenna input (ANT 1 or ANT 2).
To select the antenna input:
1. Press MENU, then use "_ or l_ to highlight the SET UP menu.
2. Press • or • to highlight ANT 1/2.
43AX60 and 43AX60A
MENU • II_VA
50AX60 and 50AX60A
MENU AV•Ib
_SET UP
LANGUAGE ENGL_SN
ADD/ERASE ADD
3. Press _ or I_ to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
Using the TV/VIDEO button on the TV
_btt can monitor or change the signal source that is connected to the
TV. By pressing the TV/VIDEO button on your TV, you can select
the ANT 2, ANT 1, VIDEO 1, VIDEO 2, VIDEO 3 or
ColorStream mode. The signal source you are currently connected to
will be displayed ira purple.
To select the antenna input:
1. Press theTV/VIDEO button. The signal source you are
connected to is displaved in purple.
43AX60 and 43AX60A
TV/VlDEO
50AX60 and 50AX60A
\
8OURCE SELECTION
ANT
WDE©
VIDEO
EO 3
TV/VlDEO
2. Press the button until ANT 1 or ANT 2 is displayed ira purple,
indicating the antenna terminal you wish to use.
22