14.1
Removing the front wheel
14.2
Installing the front wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Lift the motorcycle with the front lifting gear. (
Main work
–
Remove screw
hole.
–
Loosen screw
–
Loosen screws
–
Press on screw
clamp.
–
Remove screw
Warning
Danger of accidents Damaged brake discs reduce the
braking effect.
–
Always lay the wheel down in such a way that the
brake disc is not damaged.
–
Hold front wheel and remove wheel spindle. Take the front
wheel out of the fork.
Info
T04601-01
Do not actuate the hand brake lever when the front
wheel is removed.
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Remove the spacers.
–
Clean and grease shaft seal rings
of the spacers.
Long-life grease (
–
Insert the spacers.
T04602-01
1
and pull wheel speed sensor
3
by several rotations.
4
.
3
to push the wheel spindle out of the axle
4
.
1
and contact surfaces
p. 121)
WHEELS, TIRES 14
p. 66)
p. 66)
2
out of the
A
77