Quick Selector 2 Display; Navigation Display (Optional); Call Display - KTM 390 DUKE 2024 Owner's Manual

7 COMBINATION INSTRUMENT
7.20
7.21
7.22
30

Quick Selector 2 display

I00508-10

Navigation display (optional)

I00506-10

Call display

I00507-10
When the menu is closed, the Quick Selector 2 display is opened
by pressing the DOWN button.
Press the BACK button to close the Quick Selector 2 display.
Info
The Quick Selector 2 display can be configured in
the Settings menu under Quick Selector 2. Any information
can be selected.
The Navigation indicator (optional) appears when the navigation
function is activated.
In the Navigation display (optional), the direction arrow, the
distance from the destination, the estimated arrival time of the
cellphone, the distance to the next waypoint, and the street name
are displayed.
The Navigation display (optional) can be switched on or off in
the Navigation submenu (optional).
Conditions for use:
–
The combination instrument is connected to a suitable phone.
–
The KTMconnect app (optional) is installed and connected on
a suitable cellphone (Android devices Version 7.0 and higher,
iOS devices Version 14 and higher).
Warning
Danger of accidents Headphone volume which is too high
distracts attention from traffic activity.
–
Always select headphone volume which is low enough
for you to still clearly hear acoustic signals.
The Call indicator appears for incoming or active calls.
Press the SET button to accept an incoming call.
Press the BACK button to reject an incoming call.
Press the UP button to increase the audio volume.
Press the DOWN button to reduce the audio volume.
Info
It is not possible to change the audio volume using the
combination switch with every cellphone.
The call duration and contact are displayed. Depending on
the cellphone settings, the contact is shown by name.
You cannot navigate in the menu during an active phone
conversation.