Code Entry - Toshiba DST-3000 Owner's Manual

Toshiba DST-3000 High Definition Digital Receiver

Code Entry

Look for your device type and brand in the following charts. You will find one or more codes that
should operate your device. If there is more than one code, try each of them to find the one that
controls your device.
Once you are in programming mode (as explained under "Programming Mode" on the previous
page), enter the three-digit code. Press the device key being programmed to lock in the code. The
remote control will remember the code until you reprogram it.
Test whether the entered code matches your device by pressing the key. If the device
POWER
doesn't respond, repeat the process using the next code for your brand or try the code scan
method described under "Code Scan" on the previous page.
Page 8-4