Table of Contents
Advertisement
could be the kids' channels, and Family could be all channels that Mom and Dad have deemed
appropriate for the entire family. Each of the lists, with the exception of Family, can be renamed.
Note: Remember that when the DST-3000 receiver is locked, only channels
selected in the Family list can be viewed. This means that even though a
channel appears on the Fav. A, Fav. B, Fav. C, or All Channels list, the
selected channel must also be on the Family list in order to view it.
Note: For the Family list limit to be in force, the DST-3000 receiver must be
locked.
On the left of the CHANNEL LISTS screen are buttons for Done, Video, AutoSet, Rename,
Clear, and Set, which are explained below:
Done
Highlighting the Done button on the screen and pressing the
causes an exit from the CHANNEL LISTS screen and a return to the SETUP screen.
Video
Highlighting the Video button on the screen and pressing the
will return you to the last program you were viewing.
AutoSet
AutoSet is designed to help in the initial programming of your channel lists. When you select the
AutoSet button, a pop-up menu appears showing each of the channel lists. Highlight and select a
channel list to be programmed. Once selected, the AutoSet Progress pop-up status panel appears.
It will take several minutes for the DST-3000 receiver to scan through all channels and determine
which ones you are authorized to receive. The results of this scan will be stored in the designated
channel list.
Note: The AutoSet Channel Scanning Process can inadvertently exclude some
channels (such as the MUSIC CHOICE channels) or include some Pay Per
View channels. You can manually edit your channel lists after AutoSet is done
(see "Tag Boxes" below).
Rename
When you highlight the Rename button and press the
appears. You can choose any of the first three lists to be renamed. The All and Family lists cannot
be renamed. Once you have selected a list, a Rename List entry keyboard pop-up panel appears.
You can highlight the desired letter using the , , , and
When you have finished, choose OK.
Clear
You may decide to remove all channels from a particular list later on. Selecting Clear will allow
you to clear all channels from a chosen list. You may then add channels back in.
Set
If you decide to include all channels in a particular list, selecting Set will allow you to specify the
list. You may then remove channels from this list, if you so choose (see "Tag Boxes" below).
Page 7-10
Toshiba DST-3000 High Definition Digital Receiver
L
L
key on the remote control
SELECT
key on the remote control
SELECT
key, a Rename List pop-up menu
SELECT
keys. Press
to enter the letter.
SELECT
Advertisement
Table of Contents
