Boot - Lenovo ThinkSystem HR330A User Manual And Hardware Maintenance Manual

using the value from Factory Defaults or from a file in the file system.
4. Forbidden Signatures: This feature allows the user to configure the settings of the Forbidden Signatures. User can update/append it
using value from Factory Defaults or from a file in the file system.
5. Authorized TimeStamps: This feature allows the user to configure the settings of the Authorized TimeStamps. User can
update/append it using value from Factory Defaults or from a file in the file system.
6. OsRecovery Signatures: This feature allows the user to configure the settings of the OsRecovery Signatures. User can update/append
it using value from Factory Defaults or from a file in the file system.

3.7 Boot

Use the arrow keys to select Boot on top of the screen. The Boot Settings screen looks like below.
Boot Configuration:

Setup Prompt Timeout: Set the number of seconds to wait for setup activation key. 65535 (0xFFFF) means indefinite
waiting. The default value is 5 seconds

Bootup NumLock State: Select the keyboard NumLock state when boot. The options are: On and Off
 Quiet Boot: Enables or disables Quiet Boot option. The default value is 'Enabled'

Boot Option Priorities: Prioritizes the order of bootable devices that the system boots from. Press <Enter> on each entry
from top to bottom to select devices.

New UEFI OS Boot Option Policy: Controls the placement of newly detected UEFI boot options. The default value is
'Place First' so any new OS installed will have highest priority. The options are: 'Default', 'Place First', 'Place Last'.
76