Lenovo ThinkSystem HR330A User Manual And Hardware Maintenance Manual page 133

2.2.2 Installing CentOS
2.2.2.1 Instructions for Aptio Setup Utility
Boot the system to Aptio Setup Utility by pressing "Esc" during system boot-up.
1.
Select the "Save & Exit" tab and then select Ethernet PXE boot entry, as shown below.
2.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Main Advanced
/----------------------------------------------------+-------------------------\
| Discard Changes and Exit Save
| Changes and Reset Discard Changes
| and Reset
|
| Save Options
| Save Changes
| Discard Changes
|
| Restore Defaults
| Save as User Defaults
| Restore User Defaults
|
| Boot Override
|
UEFI: PXE boot on MAC: xx:xx:xx:xx:xx:xx
| UEFI: PXE boot on MAC: xx:xx:xx:xx:xx:xx
| UEFI: PXE boot on MAC: xx:xx:xx:xx:xx:xx
| UEFI: Built-in EFI Shell
| UEFI: Linux
| UEFI: HGST HUS726020ALE610
Version 2.17.1254. Copyright (C) 2017 American Megatrends, Inc.
Security Boot Save & Exit Server Mgmt
^|
*|
*|
*|
*|
*|
*|
*|
*|
*|-------------------------|
*|><: Select Screen
*|^v: Select Item
*|Enter: Select
*|+/-: Change Opt.
*|F1: General Help
+|F2: Previous Values
+|F3: Optimized Defaults
+|F4: Save & Exit
v|ESC: Exit
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
133