Using The Flash - Toshiba PDR-2300 Owner's Manual

Using the Flash

The flash is designed to function automatically in dark places. You can take a picture with the suitable flash setting
according to the different conditions. If you change the flash setting, the camera will remain in that setting even when
the camera is turned off.
Turn the camera on.
Turn the mode dial to the [
Press the [
camera repeatedly until your desired flash mode
appears.
Press the shutter button down halfway, then press it
the rest of the way down.
IMPORTANT
• When taking pictures in too bright places or under the situation that the subject is too close, the pre-flash
• When the white balance is set to the mode other than AUTO, the flash is automatically changed to OFF.
52
] button located on the top of the
together with the main flash sometimes reach up to four times.
At this time, you can still select the flash mode that you require if necessary by manually pressing the [ ]
button.
] mode or the [ ] mode.